Ram 2500 and 3500 diesel · Elgin CDJR · Streamwood, IL

Ram 2500/3500 DPF Regeneration Guide

The 6.7L Cummins diesel in the Ram 2500 and 3500 uses a Diesel Particulate Filter (DPF) that cleans itself through regeneration. Here is what each Exhaust Filter message means, how to clear a filter that is nearly full and when the truck needs a dealer, from the 2026 Ram 2500/3500 owner's manual.

Black Ram 2500 Crew Cab pickup in a photo studio
Ram 2500. Illustrative photo.
40% fullThe truck looks for chances to regenerate automatically, with no driver action
70% full"Exhaust Filter Nearing Full" message: drive at highway speeds to clear
About 45 minDriving typically needed to fully regenerate a DPF that is 90% full
100% fullPower reduced; regeneration no longer possible; see a dealer

The short answer

The 2026 Ram 2500/3500 owner's manual says the Powertrain Control Module manages engine combustion so the exhaust system's catalyst can trap and burn particulate matter, with no input from you. When the DPF is 40% full, the truck looks for chances to regenerate automatically. Mostly short, low-speed trips may keep the system from reaching the conditions needed to burn off the soot; at 70% full you will see "Exhaust Filter Nearing Full Safely Drive at Highway Speeds to Clear." It does not have to be done immediately, but should not be neglected: the fuller the DPF, the longer regeneration takes. At 100% full, engine power is reduced and the truck should go to an authorized dealer as soon as possible.

How DPF regeneration works on a Ram Cummins

The manual says diesel-equipped Ram 2500 and 3500 trucks have an exhaust after-treatment system that reduces emissions with a Diesel Particulate Filter (DPF) and a Selective Reduction Catalyst (SCR). The Powertrain Control Module (PCM) manages engine combustion to allow the exhaust system's catalyst to trap and burn Particulate Matter (PM) pollutants, with no input or interaction on your part.

When the DPF is 40% full of particulate matter, the truck looks for opportunities to automatically enter regeneration mode, without alerting the driver or requiring any action. However, the manual says that under conditions of exclusive short duration and low speed driving cycles, the engine and after-treatment system may never reach the conditions required to remove the trapped PM.

From the 2026 Ram 2500/3500 Owner's Manual, Diesel Particulate Filter (DPF) Messages and Diesel Engine Noise (pp. 132, 173), read November 17, 2026.

Ram exhaust filter messages and what they mean

MessageWhen it showsWhat to do, per the manual
Exhaust Filter Nearing Full Safely Drive at Highway Speeds to ClearThe DPF reaches 70% full. Shows at key-on and when the truck is in PARK, with a single chime. Clusters with analog gauges say "at Consistent Speed" instead of "at Highway Speeds".It is not necessary to immediately drive at highway speeds, or to continue driving once regeneration has started, but it should not be neglected for long.
Exhaust Regeneration In Process Continue DrivingThe DPF reaches 70% full and regeneration engages automatically while the truck is driven at a suitable speed. Repeats every three minutes while the DPF self-cleans.The message says to continue driving. If you cannot, the system resumes regeneration at its next opportunity and shows the message again.
Exhaust System — Regeneration CompletedDPF self-cleaning is complete, with one chime.The message tells you the self-cleaning has finished.
Exhaust Filter Full — Power Reduced See DealerThe DPF reaches 100% full, with the Malfunction Indicator Light (MIL) and a chime. Engine power is reduced.Regeneration is no longer possible. Take the truck to an authorized dealer as soon as possible to have the DPF manually cleaned.
Perform ServiceEmissions maintenance is due at a set interval.Have the emissions maintenance performed. It may include replacing the Closed Crankcase Ventilation (CCV) filter element.

From the 2026 Ram 2500/3500 Owner's Manual, Diesel Particulate Filter (DPF) Messages (pp. 132-133), read November 17, 2026.

How to clear a nearly full DPF

When the "Exhaust Filter Nearing Full" message appears, the message itself tells you what to do: safely drive at highway speeds (or at a consistent speed, on analog clusters) so regeneration can run. The manual says the fuller the DPF is, the longer the regeneration process will take to complete. For example, if the DPF reaches 90% full, complete regeneration will typically require 45 minutes of driving to restore the system to normal operating condition.

Do not let it reach 100%. The manual says that in extreme cases a completely full DPF can damage the exhaust system, requiring part replacements, and that for these reasons you should never let the DPF reach 100% full.

From the 2026 Ram 2500/3500 Owner's Manual, Diesel Particulate Filter (DPF) Messages (pp. 132-133), read November 17, 2026.

Why the idle speed rises to 900 RPM

The manual says that if the engine is allowed to idle, or the truck is driven on low engine speed drive cycles, for more than two hours, the system automatically enters an emissions operating mode that raises engine idle speed to 900 RPM. This mode is designed to help maintain the Diesel Particulate Filter. The idle speed returns to normal when the brake pedal is applied. You may notice a small change in engine tone or a slight change in performance while accelerating at speeds below 20 mph (32 km/h). The mode may last up to an hour of idle time, or around 20 minutes of driving time.

From the 2026 Ram 2500/3500 Owner's Manual, Intervention Regeneration Strategy — Message Process Flow (p. 306), read November 17, 2026.

Manual DPF regeneration on Ram Chassis Cabs

On equipped Chassis Cabs, the manual says a manual regeneration can be enabled through the instrument cluster. It lets the DPF complete a regeneration, lowering the soot level, without having to drive the vehicle.

ItemFrom the manual
GearThe vehicle must be in PARK to access this feature
Fuel levelMust be over 12.5% full
During regenerationA message shows the time left, and the instrument cluster displays the soot level

From the 2026 Ram 2500/3500 Owner's Manual, Diesel Particulate Filter (DPF) Manual Regeneration — Chassis Cabs (p. 174), read November 17, 2026.

DPF gauge and a hot-exhaust warning

The instrument cluster display lists a Diesel Particulate Filter item (if equipped) under Vehicle Info. The manual says the DPF gauge on the Premium Instrument Cluster remains available during regeneration, while analog instrument clusters display "Automatic Exhaust Regeneration In Progress" in place of a value.

The manual also warns that a hot exhaust system can start a fire if you park over materials that can burn, such as grass or leaves contacting the exhaust system. Do not park or operate the truck where the exhaust system can contact anything that can burn.

From the 2026 Ram 2500/3500 Owner's Manual, Vehicle Info, DPF Messages and Intervention Regeneration Strategy (pp. 128-129, 133, 306), read November 17, 2026.

Diesel emissions service at Elgin CDJR

We service the Cummins 6.7-liter turbo diesel in the Ram 2500 and 3500, diesel exhaust fluid (DEF) and emissions systems, and trailer-brake setups, wherever your truck was bought. Visit our Ram service center, schedule service or see our service specials.

Our service department is open Monday to Friday 7 a.m. to 7 p.m. and Saturday 7:30 a.m. to 4 p.m., and is closed Sunday. Elgin CDJR is at 1500 W. Lake St. in Streamwood. Get directions.

Ram DPF regeneration FAQ

When does a Ram 2500 or 3500 regenerate the DPF?

The 2026 Ram 2500/3500 owner's manual says that when the DPF is 40% full, the truck looks for opportunities to automatically enter regeneration mode, without alerting the driver or requiring any action.

What does Exhaust Filter Nearing Full mean on my Ram?

Per the manual, it shows when the DPF reaches 70% full, which can happen when driving is mostly short, low-speed trips. Safely drive at highway speeds (or a consistent speed on analog clusters) to let regeneration run. It does not have to be immediate, but should not be neglected for long.

How long does Ram DPF regeneration take?

The manual says the fuller the DPF, the longer regeneration takes. If the DPF reaches 90% full, complete regeneration typically requires 45 minutes of driving.

What if I have to stop during regeneration?

The manual says that if time or circumstances do not allow the truck to keep being driven, the system will resume regeneration at its next opportunity and redisplay the Exhaust Regeneration In Process message.

What happens if the Ram DPF gets 100% full?

The manual says Exhaust Filter Full - Power Reduced See Dealer displays with the Malfunction Indicator Light and a chime, engine power is reduced, regeneration is no longer possible, and the truck should be taken to an authorized dealer as soon as possible to have the DPF manually cleaned.

Why is my Cummins idling at 900 RPM?

Per the manual, after more than two hours of idling or low engine speed driving, the system enters an emissions mode that raises idle to 900 RPM to help maintain the DPF. Idle returns to normal when you apply the brake pedal.

Can I start a DPF regeneration myself?

The manual describes a manual regeneration through the instrument cluster on equipped Ram Chassis Cabs. The truck must be in PARK and the fuel level over 12.5%.

What are your service hours?

Monday to Friday 7 a.m. to 7 p.m. and Saturday 7:30 a.m. to 4 p.m. We are closed Sunday.

Sources

DPF information is from the 2026 Ram 2500/3500 owner's manual (FCA US LLC), read November 17, 2026. Equipment varies by truck and model year; follow your own owner's manual. Our address, service hours and diesel service list are from our own website, checked the same day.

  1. 2026 Ram 2500/3500 Owner's Manual: Diesel Particulate Filter (DPF) Messages, Diesel Engine Noise, DPF Manual Regeneration — Chassis Cabs, Intervention Regeneration Strategy, Vehicle Info (pp. 128-129, 132-133, 173-174, 306), FCA US LLC via vehicleinfo.mopar.com, read November 17, 2026
  2. Ram service center page: Cummins diesel and emissions service, service hours, address, Elgin CDJR, read November 17, 2026