Ram 2500 · Elgin CDJR · Streamwood, IL
Ram 2500 4x4 Guide
Which Ram Heavy Duty trims come with 4x4, how the part-time transfer case works and how to shift into 4WD LOW, from Ram's 2027 Ram 2500 and 3500 Heavy Duty specifications and feature availability and the 2026 Ram 2500/3500 owner's manual.

The short answer
It depends on the truck. Ram's 2027 Ram 2500 and 3500 Heavy Duty feature availability sheet lists 4x4 as standard on the Warlock, Power Wagon and Rebel, and optional on the Tradesman, Black Express, Big Horn/Lone Star, Laramie, Limited Longhorn and Limited, which come standard as 4x2. Ram's specifications list part-time, electric-shift transfer cases with 2WD, 4WD High, Neutral and 4WD Low, a 2.64 low range ratio and no center differential. The owner's manual says to drive in 2WD on dry, hard roads and use 4WD HIGH or 4WD LOW only on loose, slippery surfaces.
Which Ram 2500 trims are 4x4?
| 2027 trim | 4x2 | 4x4 |
|---|---|---|
| Tradesman | Standard | Optional |
| Black Express | Standard | Optional |
| Warlock | Not available | Standard |
| Big Horn/Lone Star | Standard | Optional |
| Power Wagon | Not available | Standard |
| Rebel | Not available | Standard |
| Laramie | Standard | Optional |
| Limited Longhorn | Standard | Optional |
| Limited | Standard | Optional |
The feature availability sheet covers the Ram 2500 and 3500 Heavy Duty together. To check a specific truck, look for 4x4 on the window sticker or ask us to look up its build details.
From the 2027 Ram 2500 and 3500 Heavy Duty feature availability sheet (Stellantis media), Drive, read November 17, 2026.
| Item | 2027 Ram 2500/3500 Heavy Duty specification |
|---|---|
| Transfer case, 6.4-liter HEMI V8 | BW 44-46, part-time, electric shift (4x4 models) |
| Transfer case, 6.7-liter Cummins high output diesel | BW 44-48, part-time, electric shift |
| Operating modes | 2WD; 4WD High; Neutral; 4WD Low |
| Low range ratio | 2.64 |
| Center differential | None |
| Front axle (4x4) | AAM 9.25-in. beam front axle with center disconnect (electronic-locking differential on Power Wagon) |
| Ground clearance, 2500 Crew Cab 149.5-in. WB, 6-ft. 4-in. box (not Power Wagon/Rebel) | 11.1 in. (4x2) / 13.1 in. (4x4) |
From the 2027 Ram 2500 and 3500 Heavy Duty specifications (Stellantis media), Transfer Case, Axles and Dimensions, read November 17, 2026.
The four transfer case positions
The electronically shifted transfer case is operated by the 4WD Control Switch on the instrument panel and has four positions:
- 2WD: two-wheel drive high range, for normal street and highway driving on dry, hard surfaced roads. The manual notes better fuel economy in 2WD because the front axle is not engaged.
- 4WD HIGH: sends torque to the front driveshaft so the front and rear wheels spin at the same speed, for extra traction on loose, slippery road surfaces only.
- 4WD LOW: low-speed four-wheel drive with more torque than 4WD HIGH, for extra traction and maximum pulling power on loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h).
- N (Neutral): disengages both driveshafts from the powertrain, for flat towing behind another vehicle. The NEUTRAL button sits in the center of the control switch and is pushed with a ballpoint pen or similar object. Always fully engage the parking brake before leaving the truck; in Neutral it can roll even with the transmission in PARK.
Driving in 4WD HIGH or 4WD LOW on dry, hard surfaced roads may cause extra tire wear and damage to driveline components.
From the 2026 Ram 2500/3500 Owner's Manual, Four Wheel Drive, Electronically Shifted Transfer Case (pp. 182-183), read November 17, 2026.
How to shift the Ram 2500 into 4x4
2WD to 4WD HIGH
Push the desired position on the four-wheel drive control switch. Shifts between 2WD and 4WD HIGH can be made stopped or moving; while moving, the shift is quicker if you briefly release the accelerator after turning the switch. If stopped, the ignition must be in ON/RUN, with the engine running or off. The system will not shift between 2WD and 4WD HIGH while the wheels are spinning; slow down and stop the spin to complete the shift.
Into or out of 4WD LOW (preferred procedure)
- With the engine running, slow the truck to 2 to 3 mph (3 to 5 km/h).
- Shift the transmission into NEUTRAL.
- While still rolling, push the desired position on the transfer case control switch.
- When the new position indicator light is on and no longer flashing, shift the transmission back into gear.
Alternate procedure: bring the truck to a complete stop, and with the ignition in ON/RUN and the engine running, shift into NEUTRAL, push the desired position, then shift back into gear once the light stops flashing. Some gear noise when shifting into or out of 4WD LOW is normal. If a requirement is not met, the new position light keeps flashing; return the switch to the original position, make sure the requirements are met, wait five seconds and try again.
From the 2026 Ram 2500/3500 Owner's Manual, Shifting Procedure (pp. 183-184), read November 17, 2026.
Tires, speed and the SERV 4WD light
- Proper four-wheel drive operation depends on tires of equal size, type and circumference on each wheel. Any difference in tire size can damage the drivetrain.
- In 4WD LOW, engine speed is about three times that of 2WD or 4WD HIGH at a given road speed. Do not overspeed the engine or exceed 25 mph (40 km/h).
- Do not shift while only the front or rear wheels are spinning; it could damage driveline components.
- Because four-wheel drive improves traction, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road conditions permit.
- If the SERV 4WD warning light stays on after start-up or comes on while driving, the four-wheel drive system is not working properly and needs service. Always engage the parking brake when powering down with that light on.
From the 2026 Ram 2500/3500 Owner's Manual, Four Wheel Drive and Shifting Procedure (pp. 183-184), read November 17, 2026.
Lockers and sway bar disconnect
Ram's 2027 feature availability sheet lists electronic-locking front and rear differentials as standard on the Power Wagon and as part of a package on the Tradesman, and the Rebel gets the electronic-locking rear only. The Power Wagon Equipment Group (4x4 2500 HEMI V8 only), standard on the Power Wagon and optional on the Tradesman, includes Tru-Lok front and rear axles and a front disconnecting stabilizer bar. The owner's manual says the lockers should only be engaged in low-speed, extreme off-road situations, and never on hard surfaced roads.
- REAR LOCK: in 4WD LOW, 4WD HIGH or 2WD, push REAR LOCK while traveling under 10 mph (16 km/h).
- FRONT/REAR LOCK (front locker, if equipped): push FRONT/REAR LOCK while traveling under 10 mph (16 km/h) in 4WD LOW. The rear axle must be locked before the front will lock.
- AXLE UNLOCK: the normal position for everyday driving.
Sway bar disconnect (if equipped): shift to 4WD HIGH or 4WD LOW and push the SWAY BAR button for more front suspension travel off road. Do not drive on hard surfaced roads or above 18 mph (29 km/h) with the bar disconnected; the system tries to reconnect the bar above 18 mph.
From the 2027 Ram 2500 and 3500 Heavy Duty feature availability sheet (Stellantis media), Electronic-locking differentials, read November 17, 2026.
From the 2026 Ram 2500/3500 Owner's Manual, Stabilizer/Sway Bar System and Axle Lock System (pp. 191-193), read November 17, 2026.
Ram 2500 4x4 service at Elgin CDJR
Our service department works on the Ram 2500, wherever it was bought. Visit our Ram service center or parts center, schedule service or see our service specials. If the SERV 4WD light comes on, bring it in.
Our service department is open Monday to Friday 7 a.m. to 7 p.m. and Saturday 7:30 a.m. to 4 p.m., and is closed Sunday. Elgin CDJR is at 1500 W. Lake St. in Streamwood. Get directions.
Ram 2500 4x4 FAQ
Is the Ram 2500 4x4 standard?
Only on some trims. Ram's 2027 feature availability sheet lists 4x4 as standard on the Warlock, Power Wagon and Rebel, and optional on the other trims, which are 4x2 as standard.
Is the Ram 2500 4x4 full-time?
No. Ram's specifications list part-time transfer cases, and the owner's manual says to drive in 2WD on dry, hard surfaced roads and use 4WD HIGH or 4WD LOW only on loose, slippery surfaces.
Can I shift the Ram 2500 into 4WD HIGH while driving?
Yes. The owner's manual says shifts between 2WD and 4WD HIGH can be made with the truck stopped or moving.
How fast can I drive in 4WD LOW?
The manual says not to exceed 25 mph (40 km/h) in 4WD LOW.
Does the Power Wagon have locking differentials?
Yes. Ram lists electronic-locking front and rear differentials as standard on the Power Wagon and as part of a package on the Tradesman; the Rebel has an electronic-locking rear.
What are your service hours?
Monday to Friday 7 a.m. to 7 p.m. and Saturday 7:30 a.m. to 4 p.m. We are closed Sunday.
Bring your Ram 2500 to Streamwood
Visit Elgin CDJR at 1500 W. Lake St. in Streamwood.
Sources
Trim availability and specifications are from Ram's 2027 Ram 2500 and 3500 Heavy Duty feature availability sheet and specifications on the Stellantis media site, and operating information is from the 2026 Ram 2500/3500 owner's manual (FCA US LLC), all read November 17, 2026. Equipment varies by vehicle and model year; follow your own owner's manual. Our address, service hours and the models we service are from our own website, checked the same day.
- 2027 Ram 2500 and 3500 Heavy Duty feature availability (Drive, electronic-locking differentials), Stellantis North America media site, read November 17, 2026
- 2027 Ram 2500 and 3500 Heavy Duty specifications (transfer cases, axles, ground clearance), Stellantis North America media site, read November 17, 2026
- 2026 Ram 2500/3500 Owner's Manual: Four Wheel Drive, Shifting Procedure, Sway Bar and Axle Lock Systems (pp. 182-184, 191-193), FCA US LLC via vehicleinfo.mopar.com, read November 17, 2026
- Ram service center page: Ram models serviced, service hours, address, Elgin CDJR, read November 17, 2026